Descriptions:

　　Equipped with broadband light source and based on diffraction grating, the AGSWA is capable of calculating the wavelength in high stable. AGSWA has the very excellent features as:

  • 　　No moving part

  • 　　No fan design

  • 　　High speed response

  • 　　Broadband measurement

  • 　　Temperature compensation in real time

  • 　　No need wavelength calibration

  • 　　Wavelength reading out simultaneously


Specifications:


Optical Properties:

Number of Optical channels

1, 4 or Customized

Scan Frequency

16 KHz

700 Hz

Single Channel

Four Channels

Wavelength Range

1510nm-1590nm

Wavelength Repeatability

5pm

Wavelength Resolution

1pm

Dynamic Range

30 dB

Standard number of FBG Per Channel

40

Optical Connector

FC/APC

Customized


Data Processing Capabilities:

Interface

Ethernet

Software Features

For spectral analysis, peak detection, data logger, peak tracking, user can readout in temperature, pressure, or strain etc. save data to csv document

Software support

Windows


Mechanical, Environmental, Electrical Properties:

Dimension

260mm*210mm*62mm

Operation Humidity

0%-80%RH

Operation Temperature

-5° to +50° C

Storage Temperature

-20° to +60° C

Input Voltage

DC 12V

Maximum Power

30W


PC recommended：

Operating system

Windows 7 or higher

CPU

At least 2.3 GHz

RAM

More than 4G Bit

Network interface

Gigabit Ethernet

GPU

Support openGL


System Setup:


1679898349193964.jpg


　　Connect the client PC to the AGSWA interrogator through Gigabit Ethernet cable.

　　Connect a 12V power supply to the 12V DC IN connector on the rear of the AGSWA. Turn the system on using the Power switch.

　　Note: It is recommended that a shielded ethernet cable is used. This is especially important in environments where strong Electromagnetic Interference (EMI) is present.